ZyXEL Communications NBG334SH - Manual (Page 153)

Chapter 15 Remote Management Screens
ZyXEL NBG-334SH User’s Guide
153
The following table describes the labels in this screen.
15.6 DNS Screen
Use DNS (Domain Name System) to map a domain name to its corresponding IP address and
vice versa. Refer to the chapter on Wizard Setup for background information.
To change your ZyXEL Device’s DNS settings, click Management > Remote MGMT >
DNS. The screen appears as shown.
Figure 87 DNS Remote Management
Table 64 FTP Remote Management
LABEL DESCRIPTION
Server Port You may change the server port number for a service if needed, however you must
use the same port number in order to use that service for remote management.
Server Access Select the interface(s) through which a computer may access the ZyXEL Device
using this service.
Secured Client IP
Address
A secured client is a “trusted” computer that is allowed to communicate with the
ZyXEL Device using this service.
Select All to allow any computer to access the ZyXEL Device using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the ZyXEL Device using this service.
Apply Click Apply to save your customized settings and exit this screen.
Reset Click Reset to begin configuring this screen afresh.