Table 34 pptp encapsulation – ZyXEL Communications NBG334SH User Manual

Page 96

Advertising
background image

Chapter 6 WAN

ZyXEL NBG-334SH User’s Guide

96

The following table describes the labels in this screen.

Table 34 PPTP Encapsulation

LABEL

DESCRIPTION

ISP Parameters for Internet Access

Encapsulation

Point-to-Point Tunneling Protocol (PPTP) is a network protocol that enables

secure transfer of data from a remote client to a private server, creating a

Virtual Private Network (VPN) using TCP/IP-based networks. PPTP supports

on-demand, multi-protocol, and virtual private networking over public

networks, such as the Internet. The ZyXEL Device supports only one PPTP

server connection at any given time.
To configure a PPTP client, you must configure the User Name and

Password fields for a PPP connection and the PPTP parameters for a PPTP

connection.

User Name

Type the user name given to you by your ISP.

Password

Type the password associated with the User Name above.

Retype to Confirm

Type your password again to make sure that you have entered is correctly.

Nailed-up Connection

Select Nailed-Up Connection if you do not want the connection to time out.

Idle Timeout

This value specifies the time in seconds that elapses before the ZyXEL

Device automatically disconnects from the PPTP server.

PPTP Configuration

Get automatically from

ISP

Select this option If your ISP did not assign you a fixed IP address. This is the

default selection.

Use Fixed IP Address

Select this option If the ISP assigned a fixed IP address.

My IP Address

Type the (static) IP address assigned to you by your ISP.

My IP Subnet

Mask

Your ZyXEL Device will automatically calculate the subnet mask based on the

IP address that you assign. Unless you are implementing subnetting, use the

subnet mask computed by the ZyXEL Device.

Server IP Address

Type the IP address of the PPTP server.

Connection ID/

Name

Type your identification name for the PPTP server.

WAN IP Address Assignment

Get automatically from

ISP

Select this option If your ISP did not assign you a fixed IP address. This is the

default selection.

Use Fixed IP Address

Select this option If the ISP assigned a fixed IP address.

My WAN IP

Address

Enter your WAN IP address in this field if you selected Use Fixed IP

Address.

Remote IP

Address

Enter the remote IP address (if your ISP gave you one) in this field.

Remote IP Subnet

Mask

Enter the remote IP subnet mask in this field.

DNS Servers

Advertising