Yamaha 006IPTO-F0 - Manual (Page 148)

148
Chapter 12—Grouping Channels & Linking Parameters
DM1000 Version 2—Owner’s Manual
Using Fader Groups and Mute Groups
Follow the steps below to group faders or [ON] buttons for Input Channels or Output
Channels (Bus Outs 1–8, Aux Outs 1–8).
1 Press the DISPLAY ACCESS [PAIR/GROUP] button repeatedly until one of the
pages that contains the desired group and channels appears.
- Fader1–32 page
- Fader33–48 page
These pages enable you to set Fader groups (A–H) for Input Channels 1–48.
- Out Fader page
This page enables you to set Fader groups (Q–T) for Bus Outs (1–8) and Aux Outs
(1–8).
- Mute1–32 page
- Mute33–48 page
These pages enable you to set Mute groups (I–P) for Input Channels 1–32 and 33–48
respectively.
- Out Mute page
This page enables you to set Mute groups (U–X) for Bus Outs (1–8) and Aux Outs (1–8).
• Fader1–32 page
• Mute1–32 page