Video editors with confirmed compatibility, Supported commands, Remote connector pin assignment – Yamaha 006IPTO-F0 User Manual
Page 264
264
Chapter 19—Controlling the DM1000 from a Video Editor
DM1000 Version 2—Owner’s Manual
Video Editors with confirmed compatibility
As of June 2004, we have confirmed that this system operates correctly with the following
video editors.
•
Sony BVE2000, 9100
•
Accom Axial 2010, 2020, 3000
•
Ampex ACE200
•
Panasonic AG A850
For the most recent information, check the following website.
http://www.yamahaproaudio.com/
Supported Commands
All commands are Write commands that will be used to change the status of the DM1000
from the connected video editor.
Remote Connector Pin Assignment
You need the following dedicated cable to connect the DM1000’s Remote connector to a
video editor.
- Remote connector’s pin assignment
* On the dedicated cable,
2
and
8
, and
3
and
7
should be crossed.
No.
Command
Hexadecimal
1
All Stop
A0
2
Transition Duration
A7
3
Transition Start
A9
4
Monitor Mode
AA
5
FROM Machine
B4
6
TO Machine
B5
7
Monitor Machine
B6
8
Swap Machine
C0
9
FROM Source
A1
10
TO Source
A3
11
Monitor Source
A5
12
FROM Source (Multi-channel)
BC
13
TO Source (Multi-channel)
BD
14
Monitor Source (Multi-channel)
BE
15
Transition Duration (Multi-channel)
BF
Pin #
Connector on a video editor
Remote connector on the DM1000
1
Ground
Ground
2
Receive A
Receive A (*)
3
Transmit B
Transmit B (*)
4
Ground
Ground
5
Spare
Spare
6
Ground
Ground
7
Receive B
Receive B (*)
8
Transmit A
Transmit A (*)
9
Ground
Ground
1 2 3 4 5
6 7 8 9