Yamaha 006IPTO-F0 - Manual (Page 193)

Inserting Mix Parameters into Automix
193
DM1000 Version 2—Owner’s Manual
Automix
16
Inserting Mix Parameters into Automix
You can insert the static mix parameter settings into the range specified by the IN and OUT
parameters in the current Automix data. This is useful when you want to quickly insert
static EQ settings into a specified range of the Automix data.
1 After you create a new Automix following the steps in the “Creating a New
Automix” (page 190), press the DISPLAY ACCESS [SETUP] button repeatedly
until the Setup | Prefer3 page appears.
2 For the “Insert Time Link to Locate Memory” preference, select Locate mem-
ories that will be applied to Insert In and Out.
Note: If the timecode source is MIDI clock, this preference setting is ignored, since the IN and
OUT parameters in the TIME SETTING section (page 207) on the Automix | Event Job page
will be applied.
Time Time
IN OUT
Before Insert After Insert
Event No event Event
Event erased
Value prior to Insert
Inserted
parameter value