Yamaha 006IPTO-F0 - Manual (Page 235)

Nuendo/Cubase SX Remote Layer
235
DM1000 Version 2—Owner’s Manual
Remote Control
17
Nuendo/Cubase SX Remote Layer
You can remotely control Nuendo and Cubase SX using Remote Layers 1 and 2.
■ Configuring Computers
1 Connect the DM1000 to your computer using a USB cable, and install the
required USB driver included on the DM1000 CD-ROM.
Refer to the Studio Manager installation guide for more information on installing the
driver.
2 Launch Nuendo/Cubase SX, select the Device Setup menu, and set up
Nuendo/Cubase SX so that the DM1000 can communicate with the soft-
ware.
Refer to the Nuendo/Cubase SX User’s Manual for more information on setting up the soft-
ware.
■ Configuring the DM1000
1 Refer to page 218 to configure the Setup | MIDI/HOST page.
2 Press the LAYER [REMOTE 1] or [REMOTE 2] button to set the TARGET param-
eter to Nuendo/Cubase SX.
You can now remotely control Nuendo/Cubase SX using the selected Remote Layer.
Other DAW Remote Layers
You can remotely control DAW software that supports the Pro Tools protocol.
■ Configuring Computers
1 Connect the DM1000 to your computer using a USB cable, and install the
required USB driver included on the DM1000 CD-ROM.
Refer to the Studio Manager installation guide for more information on installing the
driver.
2 Launch and set up DAW software so that the DM1000 communicates with
the software.
Refer to the DAW software’s user’s manual for more information on setting up the software.
■ Configuring the DM1000
1 Refer to page 218 to configure the Setup | MIDI/HOST page.
2 Press the LAYER [REMOTE 1] or [REMOTE 2] button to set the TARGET param-
eter to General DAW.
You can now remotely control DAW software using the selected Remote Layer.