Zoom 5651A User Manual
Page 13
2
The Zoom Configuration Manager opens and displays its
Basic Setup page.
Use this Web page to configure the modem so it can connect
with your Internet service provider. You can configure the X4
manually or you can have the modem automatically configure
itself. Depending on your situation, do the following:
¾
Select MANUALLY if one or both of the following are
true:
You already have the VPI, VCI, and Encapsulation
settings from your Internet service provider.
You have a static IP address that you plan use with the
X4. (Only those whose Internet service provider
instructs them to use a static IP address and advanced
users with special configuration needs will require
static IP addressing.)
To continue configuring the modem manually, skip the rest of
the steps in this section and follow the instructions on page 16
(if you are NOT using a static IP address) or on page 19 (if you
have a static IP address).
Chapter 1: Installation Instructions
13