Zoom 5651A - Manual (Page 46)

46
Appendix C
TCP/IP Network Settings
If you are using a Macintosh or Linux computer, you must ensure
that your computer’s TCP/IP network settings are configured
properly. Otherwise, you will not be able to connect to the
Internet.
Note:
If you are using a Windows computer, you do not have to
configure the TCP/IP settings. This is because your Windows
computer will automatically configure them for you. Only
Windows users who are troubleshooting the X4 will need to verify
the TCP/IP settings.
Depending on your operating system, follow the steps in the
appropriate section to ensure your TCP/IP settings are correct.
• If you are using Macintosh, see Macintosh TCP/IP Settings
on page 47.
• If you are using Linux, see Linux TCP/IP Settings on
page 49.
• If you are using Windows, see Windows TCP/IP Settings on
page 50.