Zoom 5651A - Manual (Page 26)

26
3
Advanced Setup Options
The options that are set by default when the X4 is installed are
sufficient for most users. However, those that want or need to
change the X4’s settings can do so using the Advanced Setup
page. This chapter explains how to specify advanced options.
The information in this chapter applies to you if:
• Your Internet service provider instructs you to enable,
disable, or change the default settings for your X4 in order
for it to work properly with your ADSL service. See How To
Use the Advanced Options on page 27 for a table listing
the Advanced Setup areas that you can customize.
• You need to change your Wide Area Network settings (for
example, if you have a static IP address). See Changing
Your WAN Settings on page 33 for more information.
• You want to change the default firewall settings (for
example, if you have multiple computers connected to the
Web, you can specify that one or more users receive an
email alert if the network is attacked). See Changing Your
Firewall Settings on page 34 for more information.
• You want to change your ADSL password. See Changing
User Names and Passwords on page 35 for more
information.
• You have customized your configuration and want to back
it up for future use. See Backing Up Your Configuration on
page 37 for more information.
• You want to add, remove, or change the IP Filters. See
Using IP Filters on page 40 for more information.