Zoom 5651A - Manual (Page 32)

32 ADSL X4 User Guide
Administration Buttons
The buttons in the Administration group are typically used for
administrative tasks, such as diagnostic testing, upgrading firmware,
changing your Zoom Configuration Manager password, etc.
Click a button below, then click the Help icon at the top of the
screen to open an online help topic about the page you are viewing.
This button… Opens a page that lets you…
User Configuration Manage the User IDs and passwords that
can access the Zoom Configuration
Manager. This is where you can change
the default password supplied to you with
the X4.
Firmware Update Specify the path to the upgrade file you
need to update your firmware. Use the
Browse button on this page to navigate to
the file, then click the Upload button to
perform the firmware update.
Set Date and Time Set the X4’s internal date and time settings
(including time zone and whether Daylight
Savings Time is in effect).
Diagnostics Run a series of diagnostic tests of your
system software and hardware
connections. You can also run the Ping and
Traceroute utilities to troubleshoot
connection problems.
Backup/Restore
Config Save your current configuration settings so
that they may be restored at a later time.
SNTP Synchronize the X4 with an SNTP (Simple
Network Time Protocol) server.
System Log View data generated or acquired by routine
system communication with other devices.
This information does not necessarily
represent unexpected or improper
functioning and is not captured by the
system traps that create alarms. You can
save the system log to a file.
Reboot Reboot the X4 and reset its configuration to
the factory defaults.