Zoom 5651A - Manual (Page 35)

35
Changing User Names and
Passwords
Use the User Configuration page to manage the user names and
passwords that can access the Zoom Configuration Manager. To
open this page, click the User Configuration button, located in
the Administration group on the Advanced Setup page.
When you installed the X4 and tried to open the Zoom
Configuration Manager, you were prompted for a User Name and
Password in order to gain access. (The default name and password
were supplied to you on page 12.)
If you want, you can change the default password. Changing the
password is not required.
To change the default password
1
On the User Configuration page, locate the row that contains
the default admin user name. (Unless you have added
additional users, it should be the only row shown.)
2
Click the pencil icon at the right end of the row to open the
User Config – Modify screen.
3
In the Old Password box, enter zoomadsl. (This is the
default password you used on page 12 during installation.)
Note that it must be typed in lowercase letters.
4
In the New Password box, enter the new password you
would like to use. The password is case sensitive and cannot
exceed 128 characters.