3Com Network Video Server FlexWATCH 3110 - Manual (Page 17)

Network Video Server User’s Manual
Seyeon Tech Co., Ltd 17
3 Hardware Description
• This chapter contains list of items to be prepared for the installation of FlexWATCH TM
server.
• Please carefully read this chapter before the installation.
• Please prepare all the necessary items before start installation to prevent any possible
malfunction or any other hazard can be happened during the installation.
3.1 Caution and observance
• Keep the device in the clean and dried area where air ventilation is guaranteed. The
device is not waterproof. The waterproof device or similar device must protect from any
possible hazard by water or heavy moisture etc.
• Regulated power supply is prerequisite for stable and optimal operation of the device.
Use only power supply (SMPS 12V 1.5Am) supplied with FlexWATCH
TM server.
Manufacturer shall not liable for any hazard or shock caused by use of any other power
supply.
• To prevent risk of electric shock, do not remove system-case. No user serviceable parts
inside. Any repair or modification for the product will be allowed to qualified service
personal only
• Use the cable supplied with FlexWATCH
TM server. If you need to connect FlexWATCH TM
server to the other device (External Modem, PTZ device), power on the devices before
connect to the FlexWATCH
TM server.
3.2 Hardware Description
3.2.1 FW-3110 Hardware Description
Front Panel View
A B C D E
- INTPLUS [2005] -