Network video server user’s manual, Check points before ip assignment – 3Com Network Video Server FlexWATCH 3110 User Manual

Page 21

Advertising
background image

Network Video Server User’s Manual

Seyeon Tech Co., Ltd


21

LAN is never transmitted on the Internet.

AOIP (Always On Internet Protocol) Server: AOIP™ server (Always On IP) is run by
Seyeon Technology or its business partner and is a gateway for remote users to access
FlexWATCH™ servers which is connected dynamic IP address over DSL,Cable modem and
PSTN network over the Internet. FlexWATCH™ Network Video Server and Camera Server
family is fully supported by AOIP server and any type of IP address(Global Dynamic IP or
Private IP) can be assigned to FlexWATCHTM server and user can access FlexWATCH™
system from the Internet at anytime and anywhere through AOIP server.

2

Check Points before IP assignment

Following are list of item to be checked before you start configuration of
FlexWATCHTM server.

2.1

IP address

You need to have Static IP address and other information such as Default Gateway and
Network Mask which are to be assigned to FlexWATCH

TM

server. Please consult with your

network administrator, if FlexWATCH

TM

server is to be installed in your corporate network,

or consult with ISP if you want to install it in your home or shop for which DSL or Cable
modem Internet service is available.

Following could be a simple way of finding IP address information of your PC and with
that information you can set up IP address to FlexWATCH

TM

server in the private IP

network without consulting to your ISP.

- Open DOS Command window as following procedure.
Program> Accessories > DOS Prompt
- Enter ‘ ipconfig’ command. Following information will come up

2.1.1

Static IP address enabled PC (DHCP Disabled PC)

You can easily check whether Static IP address is assigned to your PC. If you are in the
Static IP network, it is simpler to assign IP address to FlexWATCH

TM

server than DHCP

- INTPLUS [2005] -

Advertising