3Com Network Video Server FlexWATCH 3110 - Manual (Page 48)

Network Video Server User’s Manual
Seyeon Tech Co., Ltd 48
6 Tx Module Registration(NVCP)
)
Notice
-
If you do not connect FlexWATCH TM server to NDVR server, do not set TX module
configuration
-
Once Tx Module configuration is done, set up RX module configuration in the
NDVR server as well
Video proxy function is supported by NDVR server such as FW-5440 and FW-5000 server.
By registering FlexWATCH
TM video server into NDVR server, live video can be recorded in
the NDVR server and live view can be accessed through NDVR server web page which
means user does not need to separately run web browser to view respective cameras
from FlexWATCH
TM video servers.
TX module registration is to set up the FlexWATCH
TM server to communicate with FW-
5440 or FW-5000 NDVR server or FW-VSS Proxy Server only. When TX module is enabled
at the FlexWATCH
TM server, RX module at NDVR server side should also be enabled as
well.
Two different modes are provided as a connection type. One is Passive and the other is
Active mode. Depending on which device tries to establish the connection to the other
party, the connection type will be decided.
Passive mode : NDVR server tries to establish connection to FlexWATCH TM server
Active Mode : FlexWATCH TM server tries to establish connection to NDVR server
Once connection type is decided in the FlexWATCH TM server, the connection type in the
NDVR server should be opposite so that it can communicate with FlexWATCH TM server.
For example, once Passive mode is set up in the FlexWATCH TM server, Active mode must
be set in the NDVR server.
- INTPLUS [2005] -