3Com Network Video Server FlexWATCH 3110 - Manual (Page 24)

Network Video Server User’s Manual
Seyeon Tech Co., Ltd 24
over cable.
2.2.1 LAN Cable Environment
If your PC is connected to network through LAN cable, you need to connect FlexWATCH TM
server to LAN port of Hub or Router.
2.2.2 Cross-over cable
If LAN network is not available, you can directly connect FlexWATCH TM server to your PC
through Cross-over cable. In this case, you need to prepare Cross-over cable separately
(Note that The LAN cable included in the product package is not Cross-over cable, but
normal straight cable) and you need to set your PC IP address as 10.20.30.41 and
connect the server with Factory default IP address, 10.20.30.40 through web browser.
Following is brief procedure to connect the server after changing PC IP address.
1) Click right button of your mouse on the ‘My Network Places’ icon in the main screen
window.
2) Click right button of your mouse on the ‘Local area connection’ icon and select
‘Property’ option.
3) Select ‘Internet protocol (TCP/IP)’ option and click ‘Property’ icon.
4) Select ‘use the following IP address’ option from the TCP/IP property option and set
the IP address as follow
-
IP address : 10.20.30.41
-
Network Mask : 255.255.255.0
5) Connect FlexWATCH TM server using Cross-over cable to your PC and run your web
browser and enter default IP address, 10.20.30.40 of FlexWATCH TM server in the URL
field. Note that Cross-over cable is not supplied with product.
6) Once you are connected to the server, click Admin icon and click LAN configuration
menu.
7) Enter IP address you would like to assign to the FlexWATCH TM server and change your
PC IP address again.
- INTPLUS [2005] -