3Com Network Video Server FlexWATCH 3110 - Manual (Page 61)

Network Video Server User’s Manual
Seyeon Tech Co., Ltd 61
-
Once things are set up, you can login to AOIP server and connect your
FlexWATCH™ server.
)
Note
AOIP is proprietary data service run by FlexWATCH™ or its business partners around the
world. Thus, depending on the country AOIP service can run by your local vendor or
master distributor or in some case, you need to user AOIP server run by manufacturer.
More detailed information about how to use can be acquired by contact your local
distributor or
[email protected] .
6.2 AOIP configuration
As described above, once you register product in the AOIP server and Network setting is
correctly done to user AOIP function, you need to configure AOIP function in the
FlexWATCH
TM server.
1) Check the “Enable” option to use AOIP function
2) Type in AOIP server address. Either Domain name or IP address can be typed in.
3) Select whether to use HTTP or NVCP-TX port. HTTP port must be selected to view
AOIP Server IP :
AOIP server IP is subject to change depending on where you are and who is your local
distributor, since AOIP server can be run by local distributor in some countries. If there is
no local AOIP service available, you can contact manufacturer to use.
www.aoip.co.kr is
AOIP Service address run by manufacturer.
HTTP Port:
This is enable HTTP connects to AOIP server. You must select “Enable” option.
NVCP-TX Port:
- INTPLUS [2005] -