3Com Network Video Server FlexWATCH 3110 - Manual (Page 67)

Network Video Server User’s Manual
Seyeon Tech Co., Ltd 67
3) Select ‘Console’ at COM mode, and Click ‘Apply’ button
4) System reboot will be recommended, then click ‘Reboot’ button.
2.2 Serial Input device
Serial input device such as Car Speed sensor, BOG sensor, POS (Point of sales), ATM
device which communicate with external device through RS-232 port can be integrated
with the system. And that data can be transmitted along with video to anywhere over the
TCP/IP network.
1) Connect your Serial Input Device to RS422/485 Port or RS232 (COM or AUX)
port.
2) Go to Admin Menu >> System Configuration >> Serial Ports Configuration
3) Select ‘Serial Input’ at COM or AUX mode, and Click ‘Apply’ button.
4) System reboot will be recommended, then click ‘Reboot’ button.
5) After rebooting, Go to Admin Menu >> System Configuration >> Serial Ports
Configuration
6) Click “Serial Input Mode”, then following window will show up.
7) Select the installed Serial Input Device Model on the dropdown menu as above.
8) Click ‘Apply’ button.
)
Note
Serial Input device protocol can separately be uploaded into the system per customer
needs. User can upload serial input device protocol file which is provided by manufacturer
- INTPLUS [2005] -