3Com Network Video Server FlexWATCH 3110 - Manual (Page 58)

Network Video Server User’s Manual
Seyeon Tech Co., Ltd 58
modem, GSM or GPRS Modem or any type of wireless modem.
This mode is not for general users. Thus, if you need to connect special modem device,
please contact your vendor or manufacturer for more information,
[email protected]
4.4 Dial-in Configuration
Dial-in is to allow client PC to call into the server and get live video through PSTN line.
Overall configuration is very similar to that of Dial-out configuration. But much more
simple than Dial-out.
1) Go to [WAN (PPP, Modem, etc)] menu in the Network configuration mode.
2) Select “PPP Server”. This is to authenticate incoming call to server from remote client.
3) Check Authenticate more as none.
4) Configure User ID and Password, if you need to set up authenticate mode
5) Click [Apply] button and quit configuration menu.
Local IP address and Remote IP address
When remote client is connected to the server through modem connection, physical line
connection will be done. But no way to view live video unless client runs the web browser
- INTPLUS [2005] -