3Com Network Video Server FlexWATCH 3110 - Manual (Page 28)

Network Video Server User’s Manual
Seyeon Tech Co., Ltd 28
8) Click “Save IP Address” button to save IP-Address in the Flash Memory.
9) Click “Go to Home Page” button to access to FlexWATCH
TM Web browser.
10) For server configuration, click “Admin” Icon and Input User ID and Password
(Factory default is root : root) to get into configuration mode and then press “OK”
button.
)
Note
Once you changed the IP address of FlexWATCH TM server, you need to connect the server
with the changed IP address. If you lost the IP address assigned to FlexWATCH TM server,
you need to set-up a new IP address again.
)
Note
If IP address set result is failed, please check whether correct IP/MAC address is entered.
And try again with correct IP/MAC address, or please use HyperTerminal method.
4.2 IP Assignment through Hyper Terminal mode
Microsoft Windows provides Terminal emulation program, namely Hyper Terminal. For
HyperTerminal connection, Power, RS-232 Cable and LAN cable must be connected to
FlexWATCH
TM server with user’s PC. LAN cable is to run Web browser after configuration
using HyperTerminal. You can continue the below configuration after Network setting and
the next process will be same as using Installation Wizard Program.
1) Link up with the provided serial cable between COM port at FW-3440 and COM1 or
COM2 at user’s PC.
2) Run Hyper Terminal Program on user’s PC.
Window start> Program> Accessories> Communication> Hyper Terminal
3) If Hyper Terminal window come up as below, input HyperTerminal name (ex.
Flexwatch) and press ‘OK’ button.
- INTPLUS [2005] -