3Com Network Video Server FlexWATCH 3110 - Manual (Page 99)

Network Video Server User’s Manual
Seyeon Tech Co., Ltd 99
Utilities
Utilities is to manage and control system properly. Save Configuration, Flash Update,
System Reboot and system upgrade options are provided.
1 Save Configuration
This is to save all new configuration and settings in the system memory. Once new
configuration is saved by “Save Configuration” menu, new configuration will
permanently saved in the system memory only after system Reboot or system
power off
2 Reboot
Reboot means restart system. It is needed to reinitialize and restart system after
changing some configurations that has influence on the system.
Thus, it is highly recommended to reboot the system after executing “Save
Configuration” menu.
Most of case system reboot comes last only after all the new configuration is done. But
some of system menu require system reboot in the middle of system configuration so
that new setting can properly applied in the system.
Followings are list of option which require System reboot.
-
Network Configuration
-
Date & Time configuration with Time Zone change
-
Serial Port configuration
-
Memory assignment for Advance Service
-
Factory Default
)
Note
System reboot requires about 1Minutes of lead time. Thus, if you execute Reboot option,
please wait at least 1minutes to do other settings.
3 Factory Default
Factory Default is to reset all the configuration of the system as the initial status except
Network Configuration. This utility is recommended to use only when you lost all of your
- INTPLUS [2005] -