3Com Network Video Server FlexWATCH 3110 - Manual (Page 30)

Network Video Server User’s Manual
Seyeon Tech Co., Ltd 30
Stop bits 1
Flow control None
6) After setting Hyper Terminal, press Enter key several times and then you can see
messages as below. Input Login ID and Password. (Factory defaults for Admin ID and
Password are root/root.)
Seyeon Tech Co., Ltd. 2001-2003
Linux Kernel 2.4.20-syl1
FlexWATCH login:
7) If you correctly input Login ID and Password, ‘bash#’ prompt will show up as below.
FlexWATCH login: root
Password:
-----------------------------------------------------------
SYSTEM : FlexWATCH
VERSION : 3.0.040130
MODEL : FW-3110
-----------------------------------------------------------
login[504]: root login on `ttyS0'
bash#
8) Input ‘netconfig’ command after ‘bash# ’ prompt, and press Enter key. Then you can
see following network setup values.
bash# netconfig
--------------------- Network(LAN) Setup ---------------------
Current configuation
IP Address : 10.20.30.40
Network Mask : 255.255.255.0
Gateway : 10.10.1.1
Enter IP Address :
9) Input new IP address, Network Mask and Gateway values to be assigned to
FlexWATCH TM server. After this, press “y” to apply the new network configuration.
- INTPLUS [2005] -