Edimax Technology EW-7428HCn - Manual (Page 19)

19
II-3. Wireless Client Mode
Wireless Client Mode allows Ethernet devices such as smart televisions and
video game consoles to connect to a wireless access point.
1. Select Wireless Client Mode from the list. iQ Setup will start detecting
available Wi-Fi networks automatically. All detected Wi-Fi networks will be
displayed in the list. Select the one you wish to connect to.
Note: If the Wi-Fi network you wish to connect to
does not appear, click “Refresh” to detect again or
try to move the device closer to the root wireless
access point.
2. Input the password of the existing Wi-Fi network in the “Key” field and click
“Next” to continue. The device must have the same Wi-Fi password as the
root wireless access point.
Note: The device will be unable to connect to the
Wi-Fi network if you enter the wrong password. If
you do not know your Wi-Fi password, you may find
it via your Wi-Fi router’s configuration, or consult
the network administrator who set up the Wi-Fi
network.
3. The device will test the connection between itself and the root wireless
access point.