Edimax Technology EW-7428HCn - Manual (Page 45)

45
act as a station and connect to a root AP.
Enter the SSID of the root AP here, or click
the “Select Site Survey” button to choose a
root AP.
Select Site
Survey Click the “Select Site Survey” button, and a
“Wireless Site Survey Table” will pop up. It
will list all available access points nearby.
Select one access point in the table for this
device to connect to. (Please see below)
Click “APPLY” to make changes take effect. The following message will appear:
Click “CONTINUE” to save the changes but not apply them yet. This allows you
to make further changes in the browser-based management interface, before
applying them all at once.
Click “APPLY” to restart the device and implement any changes. The device will
restart itself.
Wireless Site Survey
When you click the “Select Site Survey” button, a “Wireless Site Survey Table”
will pop up. It will list all available access points nearby.
If you don’t see the SSID of the access point you wish to connect to, you may
try clicking the “Refresh” button. It is also possible the access point has hidden
its SSID, in which case you will need to manually enter the SSID in the “MAIN