Edimax Technology EW-7428HCn - Manual (Page 20)

20
If the connection is successful, the message “Connection Successfully” will
appear on-screen. Click “Next” to save settings.
If the connection failed, the message “Connection Test Failed” will appear
on-screen. Click “Back” to restart the setup process.
4. The device will show a brief summary of the name of the root wireless
access point, the name of the device, and the security type used. Click
“APPLY” to continue, or click “Back” to restart the setup process.
5. After you click “APPLY” the device will restart and save its settings. You will
see a final congratulations page.
6. You may now transfer this device to another Ethernet appliance, such as a
computer, a smart TV or a game console, by disconnecting the Ethernet
cable from your computer’s Ethernet port, and then connecting it to the
appliance’s Ethernet port. The device will remember the wireless network it
is assigned to.