Edimax Technology EW-7428HCn - Manual (Page 62)

62
New Password Enter your desired new password here. You
can use any combination of letters, numbers
and symbols up to 20 characters.
Re-Enter
Password Confirm your new password.
Click “APPLY” to make changes take effect. The following message will appear:
Click “CONTINUE” to save the changes but not apply them yet. This allows you
to make further changes in the browser-based management interface, before
applying them all at once.
Click “APPLY” to restart the device and implement any changes. The device will
restart itself.
Management IP
You can modify the IP address of the access point, enabling it to become a part
of your local area network. To do so, select “Use the following IP address” and
input the information manually.
Or you can select “Obtain an IP address automatically” which will assign an
automatic IP address to the access point. (Windows PCs only)
Note: If you choose “Obtain an IP address
automatically” then you will need to use the access
key (http://edimax******) to access the
browser-based configuration device. This is because
the access point will act as a DHCP client and
receive a dynamic IP from the DHCP server, i.e. your
broadband router.
Note: Mac users, please do not select “Obtain an IP
address automatically”.