Edimax Technology EW-7428HCn - Manual (Page 74)

74
III-7-3. Reboot
If the access point malfunctions or is not responding, then it is recommended
that you reboot the device. This is useful if the location of the access point is
not convenient.
Note: If the access point is still not responding after
a system reboot, switch off the device by
unplugging the power supply. Plug it back in after 10
seconds.
Note: Rebooting the access point will not affect the
current configuration of the device.
To reboot the device, please click “Reboot” from the “Configuration Tool”
menu in the sidebar. The following screen will be displayed:
Click “Apply” to reboot the device.
A pop up window will ask you to confirm, please click “Ok” to confirm or
“Cancel” to abort. If you click “Ok” to continue, all connections between
wireless client and access will be disconnected at this point.
You will see the following screen, and a timer will count down from 60
seconds. When the timer reaches zero, click “OK” to return to the
browser-based configuration interface.