Edimax Technology EW-7428HCn - Manual (Page 43)

43
Click “OK” to return to the “Basic Setting” screen.
III-3-6. Universal Repeater Mode
In this mode, this device acts as a wireless extender, simultaneously
performing the functions of a client and an access point. It can extend the
wireless signal of an access point, thus expanding Wi-Fi coverage and
eliminating dead spots.
Note: In repeater mode, this device will demodulate
the received signal, check the noise level, then
modulate and amplify the signal again. The output
power of this mode is the same as that of WDS and
normal AP mode.
Band Please select the wireless band you wish to
use. By selecting different band settings,
you’ll be able to allow or deny devices using
certain bands.
If you select 2.4GHz (B), 2.4GHz (N), or
2.4GHz (G), only devices using the wireless
band you select (802.11b, 802.11n, or
802.11g) will be able to connect to this
device.