Edimax Technology EW-7428HCn - Manual (Page 72)

72
III-7-1. Diagnosis
Using the diagnosis tool, you can ping a specific IP address and automatically
reboot the device if there is no response.
Watchdog and
reboot device Select “Enable” or “Disable” for the
automatic reboot function.
Ping Address Specify the IP address to ping.
Time interval Specify the frequency of the ping as a time
interval, in minutes. Enter a value from
1-60.
Click “APPLY” to make changes take effect. The following message will appear:
Click “CONTINUE” to save the changes but not apply them yet. This allows you
to make further changes in the browser-based management interface, before
applying them all at once.
Click “APPLY” to restart the device and implement any changes. The device will
restart itself.