Edimax Technology EW-7428HCn - Manual (Page 48)

48
access point’s SSIDs. You can input a
numeric VLAD ID value between 1 – 4094
for each specific ESSID.
Click “APPLY” to make changes take effect. The following message will appear:
Click “OK” to return to the “Basic Setting” screen.
III-4. WPS Setting
Wi-Fi Protected Setup (WPS) is the simplest way to build a connection
between wireless network clients and this access point. You don’t have to
select an encryption mode and enter a long encryption passphrase every time
you want to set up a wireless client, you only have to press a button on the
wireless client and this access point, and WPS will do the rest for you.
This access point supports two types of WPS: Push-Button Configuration (PBC),
and PIN code. If you want to use PBC, you will need to switch this access point
to WPS mode and push a specific button on the wireless client. You can push
the Reset/WPS button on this access point, or click the “Start PBC” button in
the web configuration interface to do this; if you want to use PIN code, you
will need to enter the PIN code of the wireless client you wish to connect to,
and then activate WPS mode in the wireless client.