Edimax Technology EW-7428HCn - Manual (Page 76)

76
IV. APPENDIX
IV-1. Configuring your IP address
The access point uses the default IP address 192.168.2.2, which may not be in
the same IP address subnet of your network; meaning you are unable to
access the browser based configuration interface. In this case, you need to
modify the IP address of your PC or Macintosh to 192.168.2.10, in order to
access the browser-based configuration interface.
The procedure for doing so varies across different operating systems; please
follow the guide appropriate for your operating system.
IV-1-1. Windows XP
1. Click the “Start” button (it should be located in the lower-left corner of your
computer), then click “Control Panel”. Double-click the “Network and
Internet Connections” icon, click “Network Connections”, and then
double-click “Local Area Connection”. The “Local Area Connection Status”
window will then appear, click “Properties”.