Bonnet – FIAT Ulysse User Manual
Page 113
GETTING TO KNOW YOUR CAR
112
LUGGAGE SEPARATING NET
(where fitted) fig. 159
To install the luggage separating net,
proceed as follows:
– lift caps A, one on each side, next
to the second row supporting handles;
– fasten the net hooks B to retain-
ers C;
– insert hooks D, one on each side,
in holes E on the floor behind the sec-
ond row seats.
BONNET
To open the bonnet:
– lift cover A-fig. 160 with the lever
next to the driver’s seat;
– pull lever B-fig. 160 in the direc-
tion of the arrow;
– press lever C-fig. 161 on the bon-
net;
Open the bonnet only
when the vehicle is sta-
tionary.
Warning. The bonnet
might fall violently if the
support rod is not posi-
tioned properly.
fig. 159
F0B0106b
fig. 160
F0B0109b
fig. 162
F0B0110b
– lift the bonnet and, at the same
time, release the support rod D-
fig. 162 from its clip E;
– place the tip of the rod D in recess
F-fig. 162 in the engine compartment.
fig. 161
F0B0454b