Hazard lights – FIAT Ulysse User Manual

Page 87

Advertising
background image

GETTING TO KNOW YOUR CAR

86

HAZARD LIGHTS

fig. 106

The hazard lights are turned on by

pressing button A regardless of the
position of the ignition key.

When the device is on, the button

starts flashing and panel indicator lights

E and R come on.

Press the button again to turn the

hazard lights off.

The vehicle is fitted with the auto-

matic hazard light switching on device.
In the event of sudden and prolonged
braking, the system automatically turns
on hazard lights, so that the driver can
focus on the vehicle control.

Range

This is the estimated distance which

can be driven with the fuel remaining
in the tank, provided that the condi-
tions of consumption are the same.

Current fuel consumption

This shows the average fuel con-

sumption based on the last few sec-
onds of driving.

Distance from destination

This shows the distance to be cov-

ered before reaching destination in ac-
tive navigation conditions.

The use of the hazard

lights is governed by local
traffic regulations. Always

comply with these regulations.

Kilometres travelled

This shows the kilometres travelled

by the vehicle from the beginning of
trip after resetting previous values.

Average consumption

This shows the average fuel con-

sumption from the beginning of trip af-
ter resetting previous values.

Average speed

This shows average speed from the

beginning of trip after resetting previ-
ous values.

fig. 106

F0B0212b

Advertising