FIAT Ulysse - Manual (Page 195)

CAR MAINTENANCE
194
Do not remove the
reservoir cap when the
engine is hot: you risk
scalding yourself.
ENGINE COOLANT fig. 5-6 Check coolant level when the engine
is cold. The level should be included
between the MIN and MAX refer-
ence line on the reservoir.
If the level is low, loosen the header
tank cap A and slowly pour a mixture
of the fluid specified in the ”Lubricant
and fluid specifications” table in sec-
tion “Technical Specifications”,
through the filler neck until nearing the
MAX mark.
The antifreeze mixture contained in
the cooling circuit guarantees protec-
tion down to –40°C.
fig. 5 - Versions 2.0 JTD 120 HP - 136 HP
F0B0444b
fig. 6 - Versions 2.2 JTD
F0B0602b