FIAT Ulysse - Manual (Page 78)

GETTING TO KNOW YOUR CAR
77
• recirculation on: when button O
is pressed it is possible to select the
following travelling conditions: closed
recirculation (relative led on), air com-
ing from outside (led off) recirculation
open, or having the system automatic
control on (led off even if activated).
You are recommended
to use the inside air recir-
culation function in the
traffic jam (car lines inside or out-
side galleries) to prevent outside
polluted air from getting into the
vehicle. Anyway, do not use this
function when several people are
onboard, to prevent inside win-
dow misting.
• driver’s and passenger’s side
temperature alignment (MONO)
fig. 88 (for versions without ad-
ditional fans): this is possible by
pressing button D, so a single tem-
perature is reached inside the passen-
ger compartment.
• rear seat air capacity adjust-
ment (REAR) fig. 89 (for versions
without additional fans): this is pos-
sible by pressing button D, thus the
second row passengers can adjust air
capacity with the additional fan knobs
A-fig. 90. The rear fan symbol will be
viewed on the display C.
The additional fan effect depends on
the position of knobs A:
0 = additional fan with minimum ca-
pacity;
– = additional fan air capacity equal to
50% of the main fan current capacity;
AUTO = additional fan capacity
equal to the main fan capacity;
+ = additional fan air capacity equal to
70% of the main fan current capacity.
It is easier to reach the
wished air temperature
conditions with inside air
recirculation. Anyway, it is better
not to use this function in
rainy/cold days because inside
window misting may increase, es-
pecially if the compressor is off.
fig. 90
F0B0102b