FIAT Ulysse - Manual (Page 84)

GETTING TO KNOW YOUR CAR
83
Windscreen wiper with rain
sensor (where fitted) fig. 101
It works only when the ignition key
is at M.
0 - Windscreen wiper off.
I - Flick wipe.
1 - Slow continuous wipe.
2 - Fast continuous wipe.
AUTO – Rain sensor activation (au-
tomatic operation). On releasing the
stalk it returns to position 0.
To make maintenance easier, e.g. to
wash the windscreen or replace the
wiper blades when the ignition key is
at S or has been removed, pull the
stalk downwards, so that the blades
stay up and stop in that position. Thus
it will be possible to lift the blades and
clean or replace them.
This function works only for 60 sec-
onds after turning the key to S or re-
moving it.
The rain sensor is provided only with
some versions. It is an electronic de-
vice connected to the windscreen
wiper and its function is to adapt flick
wipe to the rain intensity.
All the functions controlled by the
right-hand stalk are not altered.
The rain sensor is switched on au-
tomatically and turns the stalk to AU-
TO position. It gradually passes from
the windscreen wiper off, when the
windscreen is dry, to the slow con-
tinuous wipe when the rain is intense.
The rain sensor activation is signalled
by one flick wipe.
fig. 101
F0B0425b