FIAT Ulysse User Manual
Page 166
IN AN EMERGENCY
165
FRONT DIRECTION
INDICATORS fig. 19
To replace a bulb:
– Turn the bulb holder A anticlock-
wise and remove it.
– Remove bulb B by pushing it slight-
ly and turning it anticlockwise (bayo-
net coupling).
– Replace the bulb.
– Refit the bulb holder by turning it
clockwise and check it is well fastened.
FRONT FOG LIGHTS fig. 20
To replace a bulb:
– Remove cap 3 as previously de-
scribed.
– Disconnect connector A.
– Release clip B.
– Take off bulb C and replace it.
– Fit the new bulb by matching the
metal tab with the groove on the lamp.
– Refit clip B.
– Reconnect connector A.
SIDE DIRECTION
INDICATORS fig. 21-22
To replace a bulb:
– Press the lens A in direction 1 so
to compress the inside clip B, then
remove the unit by pulling it in direc-
tion 2.
– Turn bulb holder C anticlockwise.
– Take off clipped bulb D and replace
it.
– Refit bulb holder C and the trans-
parent unit.
fig. 19
F0B0136b
fig. 20
F0B0132b
fig. 21
F0B0128b