ACU-RITE VRO 300M - Manual (Page 11)

Introduction VRO 300M
4
Display
The display screen is divided into four sections.
Status bar – displays the feed rate, current tool, scale factor, job
clock, and inch/mm status.
Information screen – displays information for the task being
performed.
• Used as a readout, the screen will display the current position for
each axis.
• When programming, the program steps and the part graphic will
be displayed.
Message line – operator prompts and messages will appear here.
Softkeys – variable functions appear here; functions are selected by
pressing the hard key directly below the softkey.
2
1
3
4
3
4
2
1