Job setup tool library, Softkey for the list of available types). press, Make any changes and press – ACU-RITE VRO 300M User Manual
Page 51: Menu, then select, Again
Setup
VRO 300M
44
Job Setup
Tool Library
A list of tools is available to you for convenient selection during programming
and/or operation of the
VRO 300M
. There are 100 “slots” in the Tool Library.
You can organize tools any way you wish.
To add a tool to the tool library, select an unused slot and press the
ENTER
key. Fill in the diameter, length, units and the type
(press the
TOOL TYPES
softkey for the list of available
types). Press
DONE
to enter the tool into the
library.
To change an existing tool, move to that tool and
press
ENTER
. Make any changes and press
DONE
.
The changed tool will now appear in the library.
You can sort the tool library by tool number (so you can see them in
numerical order) or by type (so you can see all your drills together) by
pressing the
SORT BY
NUMBER
or
SORT BY TYPE
softkeys. When you do this, the unused tool
slots are not shown. To see them again, press
DONE
or
CANCEL
to return to
the
JOB SETUP
menu, then select
TOOL LIBRARY
again.
TOOL LIBRARY (DIAMETER / LENGTH)
7 OF 99
02
0.2498 /
0.000
INCH
BL END ML
01
0.2000 /
1.205
INCH
FL END ML
00
0.2000 /
0.000
INCH
EDGE FNDR
03
0.1075 /
0.000
INCH
BL END ML
04
0.375
/
0.000
INCH
DRILL
05
1.000
/
0.000
INCH
DRILL
06
07
08
09
10
11
1.000
/
0.000
INCH
BROACH
12
13
TOOL DESCRIPTION
SIZE
DIA
LEN
.3750
1.25
UNITS
INCH
TYPE
FL END ML