ACU-RITE VRO 300M - Manual (Page 2)

Readout Parameter Access Code
An access code must be entered before machine-related parameters can be
set or changed. This prevents inadvertent adjustments to the setup
parameters.
IMPORTANT
The access code is 8891
Refer to the Setup section. Begin by pressing the SETUP key then the INSTALLATION
SETUP
softkey. Press the 8 , 8 , 9 , 1 , and
ENTER
keys. The readout is now
ready for machine parameter setting operations.
IMPORTANT
Supervisors may wish to remove this page from the Reference
manual after initially setting up the readout system. Retain in a
safe place for future use.