ACU-RITE VRO 300M - Manual (Page 67)

Readout Specifications VRO 300M
60
Readout Specifications
Characteristic Specification
Operating conditions 0° to 40°C (32° to 104°F)
25% to 85% relative humidity (non-condensing)
Storage conditions -40° to 60
°
C (-40° to 140
°
F)
25% to 95% relative humidity (non-condensing)
Input requirements
Voltage:
Frequency:
Current:
95 – 264VAC single phase
47-63 Hz
350ma @115V, 200ma @230V
Fuse ¾ A, 250V, 3AG, Slo-blo
Encoder input Position signals: channels A & B
TTL square wave signal in quadrature
(90
°
nominal phase relationship)
Maximum input rate: 50 KHz
Reference signal: TTL square wave
Control Function
Interface (CFI) Compatible with ACU-RITE CFI box
Edge finder input Compatible with ACU-RITE electronic edge finder
Touch probe input Compatible with Heidenhain touch probe
Ext. video output VGA 640 x 480 pixels
Pendant input Compatible with ACU-RITE remote switch
Parallel port IEEE 1284-A for standard PC printer
Serial port EIA/TIA-232E, V.28, RS-232C compatible
Size 8.375”H x 15.25”W x 10”D
Weight 17 lbs.
Mounting Bottom: two ¼ -20 threaded inserts
FCC compliance Class A