ACU-RITE VRO 300M - Manual (Page 45)

Printing VRO 300M
38
Printing
If you have a printer connected to the VRO 300M, you can have the readout
print various pieces of information. Softkeys are available whenever there is
something that you can print.
P OSITION —when the axis positions are displayed, press the
PRINT
POSITION
softkey to
print the positions.
Information about the tool in use is
printed before the position. The absolute
and incremental positions for each
displayed axis is printed with the units of
measure.
Tool offset symbols indicate whether the
printed position is on the positive (
+
) or
negative (
-
) edge of the tool, or at the
tool’s center (
o
).
P
ROGRAM
—when the program list is visible, you can press PROGRAM
FUNCTIONS , then
the PRINT
PROGRAM
softkey to print out each step of the program.
TOOL: DIAMETER = 0.1250
INCH
LENGTH = 1.2500
INCH
X:+ Y:o
X ABS 2.9710
INCH
INC 2.9710
INCH
PROGRAM NAME: PART100
DIMENSION UNITS = INCH
001 SET TOOL
NUMBER = 2
X = 1.2500
INCH
Y = 0.5440
INCH
002 POSITION
X = 0.0000
ABS
Y = -0.5000
ABS
Some setup
information, such
as scale factor,
prints here.