Entering a transponder code, Audio panel and cns, Reply status – Garmin G950 Tecnam 2006T User Manual
Page 117
190-01146-00 Rev. A
Garmin G950 Pilot’s Guide for the Tecnam P2006T
105
AUDIO PANEL AND CNS
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL
FEA
TURES
APPENDICES
INDEX
REPLY STATUS
When the transponder sends replies to interrogations, a white R indication appears momentarily in the
reply status field of the Transponder Data Box.
Reply to
Interrogation
Figure 4-34 Reply Indication
ENTERING A TRANSPONDER CODE
Entering a transponder code with softkeys:
1)
Select the XPDR Softkey to display the Transponder Mode Selection Softkeys.
2)
Select the CODE Softkey to display the Transponder Code Selection Softkeys, for digit entry.
3)
Select the digit softkeys to enter the code in the code field. When entering the code, the next softkey in sequence
must be selected within 10 seconds, or the entry is cancelled and restored to the previous code. Selecting the
BKSP Softkey moves the code selection cursor to the previous digit. Five seconds after the fourth digit has been
entered, the transponder code becomes active.
Entering
a Code
Figure 4-35 Entering a Code
Entering a transponder code with the PFD FMS Knob:
1)
Select the XPDR and the CODE Softkeys as in the previous procedure to enable code entry.
2)
Turn the small FMS Knob to enter the first two code digits.
3)
Turn the large FMS Knob to move the cursor to the next code field.
4)
Enter the last two code digits with the small FMS Knob.
5)
Press the ENT Key to complete code digit entry.
Pressing the CLR Key or small FMS Knob before code entry is complete cancels code entry and restores the
previous code. Waiting for 10 seconds after code entry is finished activates the code automatically.
Figure 4-36 Entering a Code with the FMS Knob
Press the
ENT Key to
Complete
Code Entry
Turn the Large
FMS Knob
to Move the
Cursor to the
Next Code Field
Turn the Small
FMS Knob to
Enter Two Code
Digits at a Time