Activating a flight plan leg, Flight management – Garmin G950 Tecnam 2006T User Manual
Page 221
190-01146-00 Rev. A
Garmin G950 Pilot’s Guide for the Tecnam P2006T
209
FLIGHT MANAGEMENT
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL
FEA
TURES
APPENDICES
INDEX
ACTIVATING A FLIGHT PLAN LEG
The G950 allows selection of a highlighted leg as the “active leg” (the flight plan leg which is currently used
for navigation guidance).
Activating a flight plan leg:
1)
Press the FPL Key to display the Active Flight Plan Page (MFD) or the Active Flight Plan Window (PFD).
2)
Press the FMS Knob to activate the cursor (not required on the PFD) and turn the large FMS Knob to highlight
the destination waypoint for the desired leg.
3) Press the ACT LEG Softkey (MFD only); or press the MENU Key, highlight ‘Activate Leg’, and press the ENT Key.
A confirmation window is displayed with ‘ACTIVATE’ highlighted.
4)
Press the ENT Key to activate the flight plan leg. To cancel, press the CLR Key, or highlight ‘CANCEL’ and press
the ENT Key.
5)
Press the FMS Knob to remove the flashing cursor.
Figure 5-81 Active Flight Plan Page - Selecting the Leg Destination Waypoint
Current
Active Leg
Activate Leg Softkey
Selected Destination
Waypoint