Garmin G950 Tecnam 2006T - Manual (Page 313)

190-01146-00 Rev. A Garmin G950 Pilot’s Guide for the Tecnam P2006T
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL
FEA
TURES
APPENDICES
INDEX
301
APPENDIX A
Message Comments
DB MISMATCH – Aviation database
version mismatch. Xtalk is off. The PFD and MFD have different aviation database versions installed. Crossfill is off.
Install correct aviation database version in both displays.
DB MISMATCH – Aviation database
type mismatch. Xtalk is off. The PFD and MFD have different aviation database types installed (Americas,
European, etc.). Crossfill is off. Install correct aviation database type in both displays.
DB MISMATCH – Terrain database
version mismatch. The PFD and MFD have different terrain database versions installed. Crossfill is off.
Install correct terrain database version in both displays.
DB MISMATCH – Terrain database
type mismatch. The PFD and MFD have different terrain database types installed. Crossfill is off.
Install correct terrain database type in both displays.
DB MISMATCH – Obstacle database
version mismatch. The PFD and MFD have different obstacle database versions installed. Crossfill is off.
Install correct obstacle database version in both displays.
DB MISMATCH – Airport Terrain
database mismatch. The PFD and MFD have different airport terrrain databases installed. Crossfill is off.
Install correct airport terrain database in both displays.
GMA 1347 MESSAGE ADVISORIES
Message Comments
GMA1 FAIL – GMA1 is inoperative. The audio panel self-test has detected a failure. The audio panel is unavailable. The
G950 system should be serviced.
GMA1 CONFIG – GMA1 configuration
error. Config service req’d. The audio panel configuration settings do not match backup configuration memory.
The G950 system should be serviced.
MANIFEST – GMA1 software
mismatch. Communication halted. The audio panel has incorrect software installed. The G950 system should be
serviced.
GMA1 SERVICE – GMA1 needs
service. Return unit for repair. The audio panel self-test has detected a problem in the unit. Certain audio functions
may still be available, and the audio panel may still be usable. The G950 system
should be serviced when possible.
GIA 63W MESSAGE ADVISORIES
Message Comments
GIA1 CONFIG – GIA1 config error.
Config service req’d.
The GIA1 and/or GIA2 configuration settings do not match backup configuration
memory. The G950 system should be serviced.
GIA2 CONFIG – GIA2 config error.
Config service req’d.
GIA1 CONFIG – GIA1 audio config
error. Config service req’d.
The GIA1 and/or GIA2 have an error in the audio configuration. The G950 system
should be serviced.
GIA2 CONFIG – GIA2 audio config
error. Config service req’d.
GIA1 COOLING – GIA1 temperature
too low.
The GIA1 and/or GIA2 temperature is too low to operate correctly. Allow units to
warm up to operating temperature.
GIA2 COOLING – GIA2 temperature
too low.
GIA1 COOLING – GIA1 over
temperature.
The GIA1 and/or GIA2 temperature is too high. If problem persists, the G950 system
should be serviced.
GIA2 COOLING – GIA2 over
temperature.