Garmin G950 Tecnam 2006T - Manual (Page 36)

Garmin G950 Pilot’s Guide for the Tecnam P2006T 190-01146-00 Rev. A 24
SYSTEM OVERVIEW
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL FEA
TURES
APPENDICES
INDEX
MFD SOFTKEYS
MFD softkeys vary depending on the page selected. EIS and Navigation Map Page (default MFD page)
softkeys are described here.
Figure 1-23 MFD Softkeys (Navigation Information Display, Navigation Map Page)
DCLTR AUTO
DCLTR-2
DCLTR-3
DCLTR-1
MAP
BACK TOPO TRAFFIC TERRAIN
Select the BACK softkey to
return to the top-level softkeys.
AIRWY LO
AIRWY HI
AIRWY ON
AIRWAYS
DEST
AUTO or DEST Switches between AUTO and DEST mode for the Navigation Information display
(see the Flight Management section for more information)
MAP Enables second-level Navigation Map Page softkeys
TRAFFIC Displays/removes traffic information on Navigation Map Page
TOPO Displays/removes topographical data (e.g., coastlines, terrain, rivers, lakes) on
Navigation Map Page
TERRAIN Displays/removes terrain information on Navigation Map Page
AIRWAYS Selects the desired display of Airways; cycles through:
AIRWY ON: All Airways displayed
AIRWY LO: Low Altitude (Victor) Airways displayed
AIRWY HI: High Altitude Airways (Jetways) displayed
AIRWAYS: Airways are not displayed
BACK Returns to top-level softkeys
DCLTR (3) Selects desired amount of map detail; cycles through declutter levels:
DCLTR (No Declutter): All map features visible
DCLTR-1: Removes land data
DCLTR-2: Removes land and SUA data
DCLTR-3: Removes everything except the active flight plan