System overview, Scheduler – Garmin G950 Tecnam 2006T User Manual
Page 53
190-01146-00 Rev. A
Garmin G950 Pilot’s Guide for the Tecnam P2006T
41
SYSTEM OVERVIEW
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL
FEA
TURES
APPENDICES
INDEX
• Reset Maximum Speed—Resets maximum speed readout only
• Reset All—Resets flight timer, departure timer, odometers, and groundspeed readouts
3)
Use the FMS Knob to highlight
the desired reset option and
pr
ess the ENT Key. The selected parameters are reset
to zero and begin to display data from the point of reset.
SCHEDULER
The scheduler feature can be used to enter and display reminder messages (e.g., “Change oil”, “Switch
fuel tanks”, “Overhaul”). Messages can be set to display based on a specific date and time (event), once the
message timer reaches zero (one-time; default setting), or recurrently whenever the message timer reaches
zero (periodic). Message timers set to periodic alerting automatically reset to the original timer value once
the message is displayed. When power is cycled, messages are retained until deleted, and message timer
countdown is restarted.
Entering a scheduler message:
1) Use the FMS Knob to select the AUX - Utility Page.
2)
Press the FMS Knob momentarily to activate the flashing cursor.
3)
Turn the large FMS Knob to
highlight the first empty scheduler message naming field.
4)
Use the FMS Knob to enter the message text to be displayed in the Alerts Window and press the ENT Key.
5)
Press the ENT Key again or use the large FMS Knob to move the cursor to the field next to ‘Type’.
6)
Turn the small FMS Knob to select set the message alert type:
• Event—Message issued at the specified date/time
• One-time—Message issued when the message timer reaches zero (default setting)
• Periodic—Message issued each time the message timer reaches zero
7)
Press the ENT Key again or use the large FMS Knob to move the cursor to the next field.
8)
For periodic and one-time message, use the FMS Knob to enter the timer value (HHH:MM:SS) from which to
countdown and press the ENT Key.
9)
For event-based messages:
a)
Use the FMS Knob to enter the desired date (DD-MMM-YYY) and press the ENT Key.
b)
Press the ENT Key again or use the large FMS Knob to move the cursor to the next field.
c)
Use the FMS Knob to enter the desired time (HH:MM) and press the ENT Key.
10)
Press the ENT Key again or use the large FMS Knob to move the cursor to enter the next message.
Deleting a scheduler message:
1) Use the FMS Knob to select the AUX - Utility Page.
2)
Press the FMS Knob momentarily to activate the flashing cursor.
3)
Turn the large FMS Knob to
highlight the name field of the scheduler message to be deleted.