Fluke Networks CertiFiber Pro Users Manual - Manual (Page 328)

Versiv Cabling Certification Product Family
Technical Reference Handbook
306
3 The RESULTS screen shows the results in the active project. To
upload results from a different project, tap VIEW ALL then tap
a project.
4 Tap TRANSFER.
5 On the TRANSFER RESULTS screen, select a function:
 Export: On the EXPORT RESULTS screen, select New or All,
select the project that contains the results you want to
export to the flash drive, then tap EXPORT.
New: Export only results that do not have the same IDs as
results that are already on the flash drive. All: Export all the
results from all projects in the tester.
Note
Cable IDs are case-sensitive. For example, the
tester saves result with the names “A0” and “a0”
in two different records.
If you select the active project, the EXPORT RESULTS screen
shows the percentage of tests completed for the project and
the percentage of results already uploaded to a flash drive.
 Import: On the IMPORT RESULTS screen select the project
that contains the results you want to import from the
flash drive, then tap IMPORT.
 Delete: On the DELETE RESULTS screen select the project
that contains the results you want to delete on the flash
drive, then tap DELETE.
Upload Results to a PC
To upload results to a PC from the tester or a flash drive, use
LinkWare software.
1 Install the latest version of LinkWare software on the PC.
2 Turn on the tester and start LinkWare on the PC.
3 Use the USB cable supplied to connect the Micro-AB USB port
on the tester to a type A USB port on the PC. See Figure 122.