Fluke Networks CertiFiber Pro Users Manual - Manual (Page 403)

Chapter 17: Specifications
CertiFiber Pro OLTS Module Specifications
381
CertiFiber Pro OLTS Loss/Length Specifications (cont.)
Specification
CertiFiber Pro
Multimode
Modules
CertiFiber Pro
Singlemode
Modules
Wavelengths 850 nm, 1300 nm, 1310 nm, 1550 nm
Power measurement range 850 nm: +10 dBm to -65 dBm
All other wavelengths: +10 dBm to -70 dBm
Display Resolution dB, dBm: 0.01
Linear (nW, µW, mW): 0.001 to 9.999, 10.00 to
99.99, 100.0 to 999.9 depending upon value
Power measurement
uncertainty (accuracy)  5 %  32 pW 1,2
Measurement linearity <  0.1 dB 3
Dynamic Range for main-
remote communication and
nominal length measurement  12 dB  26 dB
1. 100 pW at 850 nm
2. Under the following conditions:

Power level 100 µW (-10 dBm), continuous wave (CW) for absolute power at
850 nm and 1310 nm.

Divergent beam, NA = 0.20 for 50/125 µm and NA = 0.14 for 9/125 µm.
 Ambient temperature 23° ± 1 °C.

SC/UPC connector with ceramic ferrule.
 After a 5 minute warm-up.
 Traceable to NIST.
3. -3 dBm to -55 dBm at 850 nm and 1310 nm. Ambient temperature 23 °C ± 1 °C. 
After a 5 minute warm-up.