Fluke Networks CertiFiber Pro Users Manual - Manual (Page 381)

Chapter 16: Maintenance
See Information About the Tester
359
GUP57.EPS
Figure 132. VERSION INFORMATION Screen for the Main Unit
 The serial number and the software and hardware versions of
the device.
 The versions of the databases for test limits and cable types.
These databases are part of the software version installed in the
main unit.
 If a remote tester is connected to the main tester, tap REMOTE to
see information about the remote tester.
 If a link interface adapter is attached to the tester, you can tap
ADAPTER to see this information about the adapter:
 Serial Number and the Hardware version of the adapter.
A
C
B
D E