Included in this catalog – Spicer Driveline Components Catalog - End Yokes User Manual
Page 2
Important: See Safety Information in General Information Section (J300P-GI)
J300P-4
INCLUDED IN THIS CATALOG
This publication represents the most comprehensive listing of Spicer
®
splined hole end yokes ever published by Dana.
We have included all the part numbers currently being produced. We have also included and noted parts that are now
discontinued, parts that will be available until current stock is exhausted, as well as parts that have been superceded.
Most current stock will be in inventory at our distribution centers, and any numbers not inventoried can be supplied
upon request.
Spicer Life
®
Series yokes begin on page 2.
Listings for round, hex, square, tapered hole and steering shaft yokes are listed in this catalog beginning
on page 63.
A chart showing the configuration and dimensions of all slingers used on end yoke Assemblies begins on
page 73.
Listings have been expanded to assist in the identification of parts, and to help find the correct part or an
alternate part for the application.
All styles of end yokes (bearing plate (BP), bearing strap (BS), cap and bolt (CB), constant velocity (CV), half
round (HR), snap ring (SR), inside snap ring (ISR), u-bolt (UB), and winged bearing (WB)) are listed under their
corresponding series/spline header, allowing easy substitution of one type for another.
All of the listings are sorted so that all the individual styles of end yokes, along with the many different
seal (hub) diameters and lengths are readily accessible. With this sorting method, alternate style substitutions
(u-bolt for bearing strap) or acceptable hub diameter substitutions can be made by looking on only one page of
the catalog.
All footnotes except those regarding part status are listed immediately under the yoke dimensional data,
alleviating the need to look at the bottom of the page.
IMPORTANT NOTICE: The data listed herein is correct to the best of our knowledge and belief; having been compiled
from reliable and official sources of information. However, WE CANNOT ASSUME ANY RESPONSIBILITY for possible error.
©2012 Dana Limited Printed in USA